Scientific publications
SCIENTIFIC PUBLICATIONS
February 22, 2021
SCIENTIFIC ARTICLES
|
Faculty of Mechanical Engineering and Technology |
|
No |
Article Title |
Main Author/ Authors |
Year |
|
1 |
A sensorless soft pneumatically powered actuator |
Ho Thi My Nu, Le The Truyen, Luong Quoc Viet |
2026 |
|
2 |
Adaptive robust iterative backstepping control for pump-driven electro-hydraulic rotary actuator |
Thanh Liem Dao |
2026 |
|
3 |
Application of Finite Element Method to Analyze Fluid Dynamic and Stability Analysis Offshore Wind Turbine Power Foundation Model |
Ngoc Thai Huynh |
2026 |
|
4 |
Aerodynamic Analysis and Durability of Offshore Wind Turbine Blades |
Ngoc Thai Huynh |
2026 |
|
5 |
Hydrodynamic and aerodynamic analysis of offshore wind turbine foundation model using finite element method |
Trong Tran Huy Hoang , Ngoc Thai Huynh |
2026 |
|
6 |
Multi-criteria decision making to improve displacement amplification ratio of an amplifying compliant mechanism flexure hinge |
Ngoc Thai Huynh,Van Nam Huynh, Quoc Nhiem Tran, Chi Bao Phan, Minh Hung Vu, Quoc Manh Tran |
2026 |
|
7 |
Sustainable manufacturing through optimal parameter selection in two-point incremental forming of A1050-H14 aluminum sheet |
Ma Van Viet |
2026 |
|
8 |
The effect of viscous damping on dynamic response of flexure-based mechanisms |
Pham Huy Hoang, Quoc Nhiem Tran, Nguyen Van Khien |
2026 |
|
9 |
Simulation of the effect of electrode tip angle on the arc voltage differential of gas tungsten arc welding (GTAW) process. |
Trinh Tien Tho, Dang Van Hai, Dinh Le Cao Ky, Vo Tuyen |
2026 |
|
10 |
Research on Optimization of Surface Roughness of Spherical Aluminum During Single-Point Diamond Turning Using BBK Model and PSO Algorithm |
Dao Van Duong |
2026 |
|
11 |
Optimizing the Magnification Ratio of the Compliant Mechanism Amplifier Using the Saw Method |
Ngoc Thai Huynh |
2026 |
|
12 |
Robust design and optimization of a large-stroke compliant constant-torque mechanism under fabrication uncertainties |
Nguyen Van Khien |
2026 |
|
13 |
Effect of process parameters and optimization of forming time of A1050 H14 aluminum sheet using two-point incremental forming for sustainable manufacturing |
Ma Van Viet |
2026 |
|
14 |
Application of Magnetorheological Damper in Aircraft Landing Gear: A Systematic Review |
Luong Quoc viet |
2026 |
|
15 |
Natural convection comparative modes for two- and three-dimensional differentially-heated cavities with and without solid or porous fins |
Le Xuan Hoang Khoa |
2026 |
|
16 |
Designing a smart wastewater sampling pump system |
Pham Huy Hoang |
2026 |
|
17 |
Dynamic simulation and analysis of bicycle frame using Laplace transform and Matlab Simulink |
Pham Huy Hoang |
2026 |
|
18 |
Numerical Simulation of Human Head Temperature: New Data and Comparison |
Trinh Tien Tho, Dang Van Hai, Dao Van Duong |
2025 |
|
19 |
6 DOF Aircraft Landing Gear System with Magnetorheological Damper in Various Taxing and Touchdown Scenarios |
Luong Quoc Viet, Ho Thi My Nu |
2025 |
|
20 |
Application of Artificial Neural Network to Control Accuracy Dimension of 3D Resin DLP Products |
Ma Van Viet |
2025 |
|
21 |
Application of finite element method to analyze deformation and stress of the friction clutch structure |
Tan Ken Nguyen, Ngoc Thai Huynh |
2025 |
|
22 |
Optimizing Power Consumption and Moisture Content of Avocado Slices Using a Heat Pump Dryer |
Nguyễn Thị Út Hiền |
2025 |
|
23 |
Analysis and optimization of thermal performance of friction clutch discs in automobiles. |
Quoc Nhiem Tran |
2025 |
|
24 |
The SSCNC software application simulates machining on a CNC milling machine. |
Van Nam Huynh |
2025 |
|
25 |
An Adaptive Predictor-Based Control Approach for Tracking Control of a Hydraulic Actuator System |
Ho Thi My Nu, Thanh Liem Dao, Lê Văn Nam |
2025 |
|
26 |
Experimentation and Simulation TPIF Process |
Ma Văn Việt |
2025 |
|
27 |
Research on the influence of technological parameters in the ultrasonic welding process of Al 6061 aluminum alloy. |
Dinh Le Cao Ky, Ho Thi My Nu, Le The Truyen |
2025 |
|
28 |
Enhanced Displacement Magnification in Symmetrical Differential Levers: A Compliant Mechanism Design Optimization Study |
Ngoc Thai Huynh, Minh Huy Nguyen, Dinh le Cao Ky |
2025 |
|
29 |
Design of a Novel Large-Stroke Compliant Constant-Torque Mechanism Based on Chained Beam-Constraint Model |
Nguyen Van Khien |
2025 |
|
30 |
Investigating the influence of electrode tip angle on arc properties when butt welding SUS 304-Ti using GTAW technology. |
Vo Tuyen, Le Cao Ky Dinh |
2025 |
|
31 |
Manufacturing and Experimental Study with soft Actuators Made of Silicone Material |
Vo Tuyen, Trinh Tien Tho |
2025 |
|
32 |
Integrated strategies on cobalt phosphides‑based electrocatalysts for efficient hydrogen evolution reaction |
Mai Thanh Dam |
2025 |
|
33 |
Design and Optimization of a 1-DOF Compliant Mechanism for Vibration-Assisted 3D Printing |
Nguyen Van Khien |
2025 |
|
34 |
Optimizing Power Consumption and Moisture Content of Avocado Slices Using a Heat Pump Dryer |
Ut Hien Nguyen Thi , Ngoc Thai Huỳnh |
2025 |
|
35 |
Overview of TIG welding technology - welding dissimilar metals |
Tan Ken Nguyen |
2025 |
|
36 |
Optimizing process parameters for formability in SPIF technology of SUS304 sheets. |
Trinh Tien Tho |
2025 |
|
37 |
Optimizing process parameters for formability in SPIF technology of SUS304 sheets. |
Dao Van Duong |
2025 |
|
38 |
Optimizing process parameters for formability in SPIF technology of SUS304 sheets. |
Vo Tuyen |
2025 |
|
39 |
Optimizing the displacement gain of an amplifier mechanism using the SAW method. |
Tan Ken Nguyen, Ngọc Thai Huynh |
2025 |
|
40 |
Optimizing injection mold design using Moldflow Insight software. |
Phan Hoang Phung |
2025 |
|
41 |
Research on optimizing cutting parameters for surface roughness during high-speed milling of heat-treated SKD11 steel. |
Nguyen Van Khien |
2025 |
|
42 |
Research on heating methods in localized enhancement forming technology. |
Ma Van Viet |
2025 |
|
43 |
Analysis of boiler thermal performance and solutions for safe and energy-efficient operation. |
Dang Van Hai |
2025 |
|
44 |
Research on forming 1.5 mm thick A1050 H14 sheet metal using multi-point incremental deformation technology. |
Ma Van Viet |
2025 |
|
45 |
Impact of trailing-edge modification in stator vanes on heat transferand the performance of gas turbine: a computational study |
Mai Thanh Dam |
2025 |
|
46 |
Parametric Investigation and Optimization of the Photovoltaic-Thermal Air Heater |
Mai Thanh Dam |
2025 |
|
47 |
Geometric accuracy study in multi-point incremental forming technology for 1.5 mm thick A1050 H14 aluminum sheet material. |
Ma Van Viet |
2025 |
|
48 |
The Solution for Calculating Mechanical Equilibrium for the Clamp Installation System to Mitigate Vibrations in Conductor Pipes at the Dai Hung Field |
Ma Van Viet |
2025 |
|
49 |
The Effect of Glass Fiber on the Notched Izod Impact Strength of Polybutylene Terephthalate/Glass Fiber Blends’ |
Ho Thi My Nu, |
2025 |
|
50 |
Three-dimensional simulation of finite element ultrasonic welding of aluminum alloy AA-6061 |
Ho Thi My Nu, Le The Truyen, Le Cao Ky Dinh |
2025 |
|
51 |
An Adaptive Predictor-Based Control Approach for Tracking Control of a Hydraulic Actuator System |
Minh Huy Nguyen |
2025 |
|
52 |
Research on the effect of clamping pressure on temperature during ultrasonic welding of AA6061 aluminum alloy |
Le Cao Ky Dinh |
2025 |
|
53 |
Displacement and stress analysis of the gripper elastic mechanism using the finite element method |
Minh Huy Nguyen, Ngoc Thai Huynh |
2025 |
|
54 |
Research on optimizing cutting parameters for surface roughness during high-speed milling of heat-treated SKD11 steel. |
Dao Van Duong |
2025 |
|
55 |
Simulation of the dynamics of an aircraft's semi-active landing gear system using Matlab-Recurdyn |
Pham Huy Hoang, Luong Quoc Viet |
2025 |
|
56 |
Modeling and kinematic simulation of tendon-driven wearable prosthetic fingers in Recurdyn |
Luong Quoc Viet |
2025 |
|
57 |
Analysis and optimization of thermal performance of friction clutch discs in automobiles. |
Van Nam Huynh |
2025 |
|
58 |
Optimization Acceleration and Contact Force of Space Slider-Crank Mechanism with Spherical Clearance Joints |
Ngoc Thai Huynh |
2025 |
|
59 |
Enhance displacement amplification ratio of micro-gripper compliant mechanisms using bridge-type amplifier based on make a decision criteria and Grey-Taguchi method |
Ngoc Thai Huynh |
2025 |
|
60 |
| Influence of cutting parameters in hard turning 40× steel with self-driven rotary tool on surface roughness using genetic programming method and artificial ecosystem-based optimisation |
Dao Van Duong |
2025 |
|
61 |
Modeling and control of a soft pneumatic finger without fiber reinforcement |
Ho Thi My Nu, Le The Truyen, Luong Quoc Viet |
2025 |
|
62 |
Optimization of a Frame of Stair-Climbing Wheelchair Structure by Using GREY-TOPSIS |
Ngoc Thai Huynh |
2025 |
|
63 |
Investigating the influence of electrode tip angle on arc properties when butt welding SUS 304-Ti using GTAW technology. |
Trinh Tien Tho, Dang Van Hai |
2025 |
|
64 |
Investigate the Influence of Technological Parameters on Weld Tensile Strength with Industrial Welding Robots |
Dao Van Duong |
2024 |
|
65 |
Overview of Granulation Technology |
Ho Thi My Nu |
2024 |
|
66 |
Multi-objective Optimization for Enhanced Material Removal Rate and Reduced Machining Roughness in Hard Turning of SKD61 Alloy Steel |
Ngoc Thai Huynh |
2024 |
|
67 |
Design and simulation of a vehicle for transporting the elderly or stroke patients. |
Trinh Tien Tho |
2024 |
|
68 |
Laser welding technology on AISI 304 stainless steel material. |
Tan Ken Nguyen |
2024 |
|
69 |
Optimize the weight of the rack using the optimization module in Abaqus. |
Le Cao Ky Dinh |
2024 |
|
70 |
Optimizing the displacement and stress of a symmetrical lever mechanism using the EDAS method. |
Ngoc Thai Huynh |
2024 |
|
71 |
pplying the gray-chain relationship analysis method to optimize wheel rim design. |
Quoc Nhiem Tran |
2024 |
|
72 |
Developing mathematical models and simulating flexible actuators using silicone material. |
Trinh Tien Tho, Le The Truyen, Vo Tuyen |
2024 |
|
74 |
Optimizing the gripper model using the Taguchi method. |
Minh Huy Nguyen |
2024 |
|
75 |
Modal analysis of bicycle frame using finite element method |
Pham Huy Hoang |
2024 |
|
76 |
Numerical study of rectified electroosmotic flow in nanofluidics: Influence of surface charge and geometrical asymmetry |
Mai Thanh Đam |
2024 |
|
77 |
Research on the design and simulation of an ultrasonic transducer. |
Luong Quoc Viet |
2024 |
|
78 |
This study investigates the influence of geometric parameters of high-speed steel external cylindrical turning tools on their cutting performance. |
Quoc Nhiem Tran |
2024 |
|
79 |
Research on wear mechanisms and improving the tool life of metal cutting tools in mechanical machining. |
DAng Van Hai |
2024 |
|
80 |
Structural and static analysis on bicycle frame using finite element method |
Pham Huy Hoang |
2024 |
|
81 |
Research on the influence of lubricants in multi-point enhancement plastic surgery technology. |
Ma Van Viet |
2024 |
|
82 |
CREO - Integrated CAD/CAM/CAE Solution |
Phan Hoang Phung |
2024 |
|
83 |
Optimize energy consumption and moisture content of sliced avocados using a heat pump dryer. |
Nguyễn Thị Út Hiền |
2024 |
|
84 |
Research on the effect of vibration frequency on temperature during ultrasonic welding of AL6061 aluminum. |
Le Cao Ky Dinh |
2024 |
|
85 |
Research on the effect of vibration frequency on temperature during ultrasonic welding of AL6061 aluminum. |
Van Nam Huynh |
2024 |
|
86 |
Optimizing the 2-degree-of-freedom precision feed mechanism using NSGA-II and ANN algorithms. |
Dang Van Hai, Nguyen Van Khien |
2024 |
|
87 |
Study on the influence of cutting parameters on consumption energy and surface roughness in high - speed face milling of SKD11 steel after heat treatment using artificial eco - system algorithm |
Dang Van Hai |
2024 |
|
88 |
Study on the influence of cutting parameters on consumption energy and surface roughness in high - speed face milling of SKD11 steel after heat treatment using artificial eco - system algorithm |
Dao Van Duong |
2024 |
|
89 |
The dynamic characteristics of the aircraft's landing gear were simulated using MATLAB and RECURDYN software. |
Luong Quoc Viet |
2024 |
|
90 |
An Intelligent Control and a Model Predictive Control for a Single Landing Gear Equipped with a Magnetorheological Damper |
Pham Huy Hoang, Luong Quoc Viet |
2024 |
|
91 |
Modeling and controlling a rotary piezo actuator |
Le The Truyen |
2024 |
|
92 |
Study on formability simulation of aluminum sheet 1.5mm thickness |
Ma Van Viet |
2024 |
|
93 |
Optimization of frame structure coach 29/34 seats in static durability state |
Ngoc Thai Huynh |
2024 |
|
94 |
Trajectory control of a hydraulic system using intelligent control approach based on adaptive prediction model |
Thanh Liem Dao |
2024 |
|
95 |
Research on the design and simulation of an ultrasonic transducer. |
Tan Ken Nguyen , Le Cao Ky Dinh , Ho Thi My Nu, Le The Truyen |
2024 |
|
96 |
Comparative Research on Double-Duct and Double-Pass Solar Air Collectors |
Dang Van Hai, Minh Huy Nguyen, Van Nam Huynh , Quoc Nhiem Tran, Le The Truyen |
2023 |
|
97 |
Reliability-Based Multi-Objective Optimization Design of a Compliant Feed Drive Mechanism for Micromachining |
Pham Huy Hoang |
2023 |
|
98 |
The research establishes design rules to ensure the feasibility of investment casting. |
Trinh Tien Tho, Vo Tuyen |
2023 |
|
99 |
Design of a five-degree-of-freedom robotic arm. |
Tan Ken Nguyen |
2023 |
|
100 |
Design and simulation of a robot's finger made of soft material. |
Tan Ken Nguyen |
2023 |
|
101 |
Optimal rigid-flexible dynamic of space slider-crank mechanism with clearance joints |
Ngoc Thai Huynh |
2023 |
|
102 |
Experimental and Metamodel Based Optimization of Cutting Parameters for Milling Inconel-800 Superalloy Under Nanofluid MQL Condition |
Ngoc Thai Huynh |
2023 |
|
103 |
Optimizing the design of a bridge-type amplifier mechanism using flexible joints. |
Trong Tran Huy Hoang |
2023 |
|
104 |
Numerical simulation investigates the effect of the number of steps on the efficiency of a solar water distillation system. |
Đang Van Hai, Van Nam Huynh |
2023 |
|
105 |
Optimizing the operation of shore cranes in container ports using the tabu search algorithm. |
Trong Tran Huy Hoang |
2023 |
|
106 |
Research on the main geometric parameters of cutting knives that affect cashew hard shell separation |
Quoc Nhiem Tran |
2023 |
|
107 |
Optimizing the body structure of passenger cars using gray-relational relationship analysis in multi-objective analysis. |
Minh Huy Nguyen |
2023 |
|
108 |
Learn about the application of SSCNC software for machining on CNC lathes. |
Van Nam Huynh |
2023 |
|
109 |
Optimizing the design of a bridge-type amplifier mechanism using flexible joints. |
Ngọc Thai Huynh |
2023 |
|
110 |
Calculating and simulating the dynamics of a gear drive using Inventor software. |
Van Nam Huynh |
2023 |
|
111 |
Industrial boilers and the issue of energy saving. |
Đang Van Hai |
2023 |
|
112 |
Analysis of strain and stress of friction clutch discs using the finite element method. |
Đang Van Hai, Nguyen Van Thanh |
2023 |
|
113 |
Optimizing the support plate structure using Abaqus |
Le Cao Ky Dinh, Nguyen Van Thanh |
2023 |
|
114 |
Determination of the Optimized Parameter of the Processing of SUS 304 Sheet Material to the Formability by SPIF Technology |
Trinh Tien Tho, Dang Van Hai, Le Cao Ky Dinh, Vo Tuyen |
2023 |
|
115 |
Design and Simulate the Finger of Soft Material Robot |
Tan Ken Nguyen |
2023 |
|
116 |
Methods for accurately determining the volume of liquid in a container when designing plastic products. |
Phan Hoang Phung |
2023 |
|
117 |
Using Autodesk MoldFlow Insight software for CAE analysis of injection molded plastic products. |
Phan Hoang Phung |
2023 |
|
118 |
Numerical simulation and design, fabrication of a hot air mango dryer. |
Ut Hien Nguyen Thi |
2023 |
|
119 |
Design and fabrication of a mechanism for generating linear micro-motion. |
Pham Huy Hoang |
2023 |
|
120 |
Geometry Improvement and Flow Simulation in the water level control valve based on the CAD/CAE and DOE integrated system |
Van Nam Huynh , Phan Hoang Phung |
2022 |
|
121 |
The dimensions of the delta robot are designed based on the available workspace. |
Tan Ken Nguyen , Lê The truyen, Minh Huy Nguyen |
2022 |
|
122 |
Improving accuracy of indoor localization system using ensemble learning |
Tran Quoc Nhiem |
2022 |
|
123 |
Study on process parameters of CNC milling machine effecting to burr height in drilling Alumunium 6061 alloy sheet |
Minh Huy Nguyen |
2022 |
|
124 |
Energy, Exergy and Economic (3E) Analysis and Optimization of a Combined Heat and Power (CHP) Plant |
Đang Van Hai, Minh Huy Nguyen |
2022 |
|
125 |
Optimizing the drying process of sliced avocados using a heat pump dryer. |
Ut Hien Nguyen Thi, Le Van Nam |
2022 |
|
126 |
Optimize ship scheduling at the dock using the Tabu search algorithm. |
Trong Tran Huy Hoang |
2022 |
|
127 |
Application of pid controller using mitsubishi plc for water tank system |
Pham Van Toan |
2022 |
|
128 |
Determining the optimal parameters of the processing of SUS 304 sheet material to the amount of recovery in the glass direction using SPIF technology |
Le Cao Ky Dinh, Vo Tuyen |
2022 |
|
129 |
Optimizing the technological parameters of the SUS 304 sheet metal processing process using SPIF technology through experimental design. |
Le Cao Ky Dinh, Vo Tuyen |
2022 |
|
130 |
Challenges and opportunities for smart manufacturing systems. |
Le Cao Ky Dinh |
2022 |
|
131 |
Pneumatic system control simulation using Automation Studio |
Le Cao Ky Dinh |
2022 |
|
132 |
Determine the Optimal Parameters of the Processing of SUS 304 Sheet Material to the Machining Time by SPIF Technology |
Le Cao Ky Dinh |
2022 |
|
133 |
Current situation and proposed solutions to improve English proficiency of students in the Mechanical Engineering Technology department. |
Le Cao Ky Dinh |
2022 |
|
134 |
The research establishes design rules to ensure moldability. |
Trinh Tien Tho, Vo Tuyen |
2022 |
|
135 |
Determine the Optimal Parameters of the Processing of SUS 304 Sheet Material to the Machining Time by SPIF Technology |
Vo Tuyen |
2022 |
|
136 |
Artificial hands based on pneumatic actuators. |
Ho Thi My Nu, Phan Hoang Phung, Le Van Nam |
2022 |
|
137 |
Inverse kinematic analysis of a 3-degree-of-freedom delta robot and its workspace. |
Tan Ken Nguyen, Ho Thi My Nu, Le The Truyen |
2022 |
|
138 |
Simulating the inverse kinematics of a robot using Recurdyn and MATLAB. |
Tan Ken Nguyen |
2022 |
|
139 |
Designing an automated control system for several climatic factors in a greenhouse system. |
Dang Van Hai |
2022 |
|
140 |
A study on the feasibility of manually assembling electrical plugs using the Kilbridge-Wester line balancing method. |
Trinh Tien Tho, Vo Tuyen |
2022 |
|
141 |
Design and optimization of Connecting Rod for 97 cc four stroke gasoline engine |
Quoc Nhiem Tran |
2022 |
|
142 |
Feasibility study on applying biodiesel produced from rubber seed oil to direct-injection combustion engines. |
Nguyen Ngoc Dung |
2022 |
|
143 |
Research on optimizing plastic injection molding parameters to improve torsional strength in 21mm valve stem products. |
Pham Huu Loc |
2022 |
|
144 |
Influence of the rotary friction welding parameters on the microhardness and joint strength of Ti6Al4V alloys |
Ho Thi My Nu |
2021 |
|
145 |
Research, design and manufacture chocolate 3D printers |
Pham Van Toang, Huu Tho Nguyen |
2021 |
|
146 |
Methods and materials for smart manufacturing |
Tan Ken Nguyen |
2021 |
|
147 |
Design a control system for a heat pump dryer to dry a variety of different products. |
Dang Van Hai, Minh Huy Nguyen |
2021 |
|
148 |
Research and design of an optimized control system for a heat pump dryer to dry various types of products. |
Dang Van Hai, Minh Huy Nguyen |
2021 |
|
149 |
Automated warehouse system modeling |
Phan Hoang Phung, Van Nam Huynh |
2021 |
|
150 |
Research on drying methods for sliced avocados using heat pump drying technology. |
Ut Hien Nguyen Thi, Quoc Nhiem Tran, Ho Thi My Nu, Le Van Nam |
2021 |
|
151 |
Using heat pump drying technology combined with infrared to save drying time for sliced avocados. |
Ut Hien Nguyen Thi |
2021 |
|
152 |
Analysis of factors affecting flow through mechanical float valves based on CFD simulation. |
Van Nam Huynh, Phan Hoang Phung |
2021 |
|
153 |
Return home safely while traveling. |
Ut Hien Nguyen Thi |
2021 |
|
154 |
Industrial Internet of Things (IoT) – a change for smart manufacturing. |
Le Van Nam |
2021 |
|
155 |
Applying CAD/CAE and 3D printing technology in the casting industry to improve productivity and product quality. |
Trinh Tien Tho |
2021 |
|
156 |
Designing an internet of things system in high-tech agricultural production |
Trinh Tien Tho |
2021 |
|
157 |
Research on improving rice processing machines. |
Quoc Nhiem Tran |
2021 |
|
158 |
Experimental research effects of technology parameters on the density and moisture content in bamboo particle board using for interior decoration sheet |
Vo Tuyen |
2021 |
|
159 |
Research on the influence of technological parameters on the flexural strength of bamboo pulp plywood blanks. |
Tan Ken Nguyen, Vo Tuyen |
2021 |
|
160 |
Thermal-hydraulic characteristics and optimization of a liquid-to-suction triple-tube heat exchanger |
Vo Tuyen |
2021 |
|
161 |
Experimental Study of Square Inlets Effect on the Performances of Gas–Liquid Cylindrical Cyclone Separators (GLCC) |
Tan Ken Nguyen, Vo Tuyen |
2021 |
|
162 |
A Research of Design the Control System of 3D Printer by Fused Deposition Modeling (FDM) Technology |
Vo Tuyen |
2021 |
|
163 |
A Research on the Kinematics and the Performances of the Effect of the Geometrical Shape of Inlet Nozzles of Gas–Liquid Cylindrical Cyclone (GLCC) Separators |
Vo Tuyen |
2020 |
|
164 |
Research on the Formability of Titanium Sheet Materials by Hot Single Point Incremental Forming Technology |
Vo Tuyen |
2020 |
|
165 |
Design a Control System of SLS Rapid Prototyping Machine |
Vo Tuyen |
2020 |
|
166 |
Stress and Transposition Analysis of the SLS Rapid Prototyping Machine Frame |
Vo Tuyen |
2020 |
|
167 |
Design of Assembling Process for SLS Rapid Prototyping Machine Installation |
Vo Tuyen |
2020 |
|
168 |
Experimental Study of Circular Inlets Effect on the Performances of Gas-liquid Cylindrical Cyclone Separators (GLCC) |
Vo Tuyen, Nguyen Tan Ken |
2019 |
|
169 |
Development of a Decision Support System for Selection of Optimal Machining Parameters and Tool Inserts in Turning Process |
Trinh Tien Tho, Ly Thanh Hung, Quoc Nhiem Tran, Huu Tho Nguyen |
|
|
170 |
Optimal design for compliant mechanism flexure hinges: Bridge-type |
Ngoc Thai Huynh |
|
|
171 |
Optimum Design for the Magnification Mechanisms Employing Fuzzy Logic-ANFIS |
Ngoc Thai Huynh |
|
|
172 |
Optimal Stress and Strain of Helical Gear and Rack in the Steering System |
Ngoc Thai Huynh |
|
|
173 |
Numerical simulation of the rotary friction welding process of titanium alloys. |
Ho Thi My Nu |
|
|
174 |
Surface Roughness Optimization for Grinding Parameters of SKS3 Steel on Cylindrical Grinding Machine |
Nguyen Van Khien |
|
|
175 |
Optimization Design of a 2-DOF Compliant Parallel Mechanism Using NSGA-II Algorithm for Vibration-Assisted Milling |
Nguyen Van Khien |
|
|
176 |
Effect of temperature on magnesium alloy sheet forming by localized incremental deformation method. |
Ma Van Viet |
|
|
177 |
Effect of lubrication on deforming the aluminum sheet with two points incremental forming techonology |
Ma Van Viet |
|
|
178 |
Influence of Machining Parameters on the TPIF Formability for Aluminum Sheet at Room Temperature |
Ma Van Viet |
|
|
179 |
Finite element simulation of the formability by tpif technology for aluminum sheet at room temperature |
Ma Van Viet |
|
|
180 |
Study on the formability by tpif technology for aluminum sheet at room temperature |
Ma Van Viet |
|
|
181 |
A Study on Rotary Friction Welding of Titanium Alloy (Ti6Al4V) |
Ho Thi My Nu, Le The Truyen |
|
|
182 |
Development of the Design and Fabrication System for Planar Cam Mechanisms |
Pham Huy Hoang |
|
|
183 |
Stiffness modeling of flexure parallel mechanism |
Pham Huy Hoang |
|
|
184 |
Micromanipulation System Design Based on Selective Actuation Mechanisms |
Pham Huy Hoang |
|
|
185 |
Optimal design and simulation of an elastic mechanism used as an amplifier for a micro-motion generating mechanism. |
Pham Huy Hoang |
|
|
186 |
Multi-objective Optimization of a Linear Flexure-Based Mechanism Using Pseudo Rigid-Body Diagram Analysis and FEA-Based Response Surface Methodology |
Pham Huy Hoang |
|
|
187 |
Design and simulation of flexure-based planar force/ torque sensor |
Pham Huy Hoang |
|
|
188 |
Design and Simulation of Micro-Linear Actuator |
Pham Huy Hoang |
|
|
189 |
Optimization design of a compliant linear guide for highprecision feed drive mechanisms |
Nguyen van Khien |
|
|
190 |
Design Optimization of Compliant Mechanisms for Vibration- Assisted Machining Applications Using a Hybrid Six Sigma, RSM-FEM, and NSGA-II Approach |
Nguyen van Khien |
|
|
191 |
Study on Simulation of Bending Angle Deformation of Compliant Actuators Made of Silicon Material |
Trinh Tien Tho, Le The Truyen, Vo Tuyen |
|
|
192 |
The Use of Matlab/Simulink Tool in Modeling the Hysteresis Phenomenon of Piezoelectric Actuators |
Pham Van Toan, Ut Hien Nguyen Thi, Le Van Nam |
|
|
193 |
Effects of Leading-Edge Modification in Damaged Rotor Blades on Aerodynamic Characteristics of High-Pressure Gas Turbine |
Mai Thanh Dam |
|
|
194 |
Effects of Damaged Rotor Blades on the Aerodynamic Behavior and Heat-Transfer Characteristics of High-Pressure Gas Turbines |
Mai Thanh Dam |
|
|
195 |
Numerical study on the influence of coolant temperature, pressure, and thermal barrier coating thickness on heat transfer in high-pressure blades |
Mai Thanh Dam |
|
|
196 |
Numerical and theoretical analysis of the influences of surface treatment on drag reduction in submarine |
Mai Thanh Dam |
|
|
197 |
Numerical investigation of crack initiation in high-pressure gas turbine blade subjected to thermal-fluid-mechanical low-cycle fatigue |
Mai Thanh Dam |
|
|
198 |
Robust Adaptive Control for an Aircraft Landing Gear Equipped with a Magnetorheological Damper |
Luong Quoc Viet |
|
|
199 |
Intelligent Control based on a neural network for aircraft landing gear with a magnetorheological damper in different landing scenarios |
Luong Quoc Viet |
|
|
200 |
Semi-active control for a helicopter with multiple landing gears equipped with magnetorheological dampers |
Luong Quoc Viet |
|
|
201 |
A supervised neural network control for magnetorheological damper in an aircraft landing gear |
Luong Quoc Viet |
|
|
202 |
Tendon-Driven Gripper with Variable Stiffness Joint and Water-Cooled SMA Springs |
Luong Quoc Viet |
|
|
203 |
Hybrid Control of Aircraft Landing Gear using Magnetorheological Damper |
Luong Quoc Viet |
|
|
204 |
Research on the operation mode of heat pump drying machine with drying experiments of scallions for saving energy |
Ut Hien Nguyen Thi |
|
|
205 |
Optimal displacement amplification ratio of bridge-type compliant mechanism flexure hinge using the Taguchi method with grey relational analysis |
Ngoc Thai Huynh |
|
|
206 |
Analysis influence of journal radius and length of bearing on dynamics of a slider-crank mechanism with two sliders and revolute clearance joints |
Ngoc Thai Huynh |
|
|
207 |
Optimal displacement amplification ratio of bridge-type compliant mechanism flexure hinge using the Taguchi method with grey relational analysis |
Ngoc Thai Huynh |
|
|
208 |
Optimization effects of design parameter on the first frequency modal of a Bridge-type compliant mechanism flexure hinge by using the Taguchi method |
Ngoc Thai Huynh |
|
|
209 |
Effect of clearance and friction in revolute imperfect joints on dynamic behaviors of a slider-crank mechanism with two sliders |
Ngoc Thai Huynh |
|
|
210 |
Optimization on effects of design parameter on displacement amplification ratio of 2 DOF working platform employing Bridge-type compliant mechanism flexure hinge using Taguchi method |
Ngoc Thai Huynh |
|
|
211 |
Analytical effects of design parameters on displacement of 2-DOF working platform employing bridge-type amplifier flexure hinge by finite element method |
Ngoc Thai Huynh |
|
|
212 |
Optimization the first frequency modal shape of a tensural displacement amplifier employing flexure hinge by using Taguchi Method |
Ngoc Thai Huynh |
|
|
213 |
Analysis and optimal design a new flexible hinge displacement amplifier mechanism by using Finite element analysis based on Taguchi method |
Ngoc Thai Huynh |
|
|
214 |
Design variables optimization effects on acceleration and contact force of the double sliders-crank mechanism having multiple revolute clearance joints by use of the Taguchi method based on a grey relational analysis |
Ngoc Thai Huynh |
|
|
215 |
Optimizing Magnification Ratio for the Flexible Hinge Displacement Amplifier Mechanism Design |
Ngoc Thai Huynh |
|
|
216 |
An optimum first modal shape frequency for flexible displacement amplifier mechanisms |
Ngoc Thai Huynh |
|
|
217 |
Artificial neural network base on grey relational analysis estimate displacement of bridge-type amplifier |
Ngoc Thai Huynh |
|
|
218 |
Application of Grey Relational Approach and Artificial Neural Network to Optimise Design Parameters of Bridge-Type Compliant Mechanism Flexure Hinge |
Ngoc Thai Huynh |
|
|
219 |
Analysis of rigid and flexible dynamics of a space-slider-crank mechanism based on finite element method |
Ngoc Thai Huynh |
|
|
220 |
Optimizing compliant gripper mechanism design by employing an effective bi-algorithm: Fuzzy logic and ANFIS |
Ngoc Thai Huynh |
|
|
221 |
Effects of Minimum Quantity Lubrication (MQL) on cutting temperature, tool wear and surface roughness in turning AISI-1045 material |
Thanh Liem Dao |
|
|
222 |
Design and fabrication of wave generator using an oscillating wedge |
Thanh Liem Dao |
|
|
223 |
Adaptive semi-parallel position/force-sensorless control of electro-hydraulic actuator system using MR fluid damper |
Thanh Liem Dao |
|
|
224 |
A Feedforward Neural Network Fuzzy Grey Predictor based Controller for Force Control of Electro-Hydraulic Actuator |
Thanh Liem Dao |
|
|
225 |
A torque estimator using online tuning grey fuzzy PID for applications to torque-sensorless control of DC motors |
Thanh Liem Dao |
|
|
226 |
Hysteresis modeling of magneto-rheological damper using self-tuning Lyapunov-based fuzzy approach |
Thanh Liem Dao |
|
|
227 |
Numerical simulation of the rotary friction welding process of titanium alloys. |
Phan Hoang Phung |
|
|
228 |
Kinematics Characteristics Analysis for Wheeled Mobile Robots Applied in the Horizontal Pipeline Inspection with Constant Cross-section |
Dao Van Duong |
|
|
229 |
Numerical simulation of the ice-making process using the fixed boundary method. |
Ho Thi My Nu |
|
|
230 |
Designing, modeling and controlling the angular bending of a foldable soft actuator without using a curvature sensor |
Ho Thi My Nu, Le The Truyen, Luong Quoc Viet |
|
|
231 |
Application of the modified Omedá method in the fault diagnosis of gear transmissions |
Pham Huy Hoang |
|
|
232 |
Balancing of flexible shaft rotating devices without using test masses based on updating the finite element model using empirical analysis. |
Pham Huy Hoang |
|
|
233 |
Regression model of TICK particle distribution in TIC/CO layer sprayed with Laser Cladding |
Ho Thi My Nu |
|
|
234 |
study on transport phenomena and kinetics for the convective drying of shrimp |
Trinh Tien Tho, Dang Van Hai, Minh Huy Ngiuyen |
|
|
235 |
Study on transport phenomena and kinetics for the convective drying of shrimp |
Trong Tran Huy Hoang, HHuynh Van Nam |
|
|
236 |
Investigation clearance size and friction effect on dynamic of a slider-crank mechanism with two sliders by quantitative analysis method |
Ngoc Thai Huynh |
|
|
237 |
Effect of clearance size and design parameters on dynamics of a slider-crank mechanism with two sliders and revolute clearance |
Ngoc Thai Huynh |
|
|
238 |
Effects of material characteristics and clearance size on dynamics of a slider-crank mechanism with two sliders and revolute clearance joints |
Ngoc Thai Huynh |
|
|
239 |
Sliding Mode Control for an Intelligent Landing Gear Equipped with Magnetorheological Damper |
Luong Quoc Viet |
|