Scientific research projects
SCIENTIFIC RESEARCH PROJECTS IMPLEMENTED OVER THE YEARS
| No. | Project Code | Project Title | Duration | Decision No. |
| 1 | DC01003009001 | Research and fabrication of an avocado dryer using heat pump technology and optimization of drying process parameters | 01/09/2019 - 31/08/2020 | 689/QĐ-DCT |
| 2 | DC01003020001 | Research, design, and fabrication of a soft robot hand to support people with disabilities | 01/09/2020 - 02/08/2021 | 3030/QĐ-DCT |
| 3 | DC01003009002 | Research, design, and fabrication of a multi-functional experimental drying model with intelligent control and monitoring systems | 01/03/2022 - 28/02/2023 | 2916/QD-DCT |
| 4 | DC01003012002 | Research and design of a Delta robot for food sorting and packaging lines using image processing techniques and soft grippers | 01/03/2022 - 09/11/2023 | 3335/QĐ-DCT |
| 5 | DC01003030002 | Design optimization of a symmetrical differential lever displacement amplification mechanism | 15/08/2023 - 14/08/2024 | 2904/QĐ-DCT |
| 6 | DB01017003001 | Research and construction of a Gas-Liquid Cylindrical Cyclone (GLCC) separator model | 01/04/2018 - 30/03/2019 | 600/QĐ-ĐHQG |
| 7 | DC01017003001 | Research on the influence of technological parameters on the bending strength of bamboo powder pressed wood blanks | 01/02/2019 - 31/01/2020 | 264/QĐ-DCT |
| 8 | - | Research and optimization of ultrasonic welding modes for electric vehicle battery terminals | 14/08/2023 - 14/08/2024 | 3274/QĐ-DCT |
| 9 | DC01003030002 | Design optimization of a symmetrical differential lever displacement amplification mechanism | 15/08/2023 - 14/08/2024 | 2904/QĐ-DCT |
| 10 | DC01003001002 | Research and multi-objective optimization design for floating buoy structures based on CAD/CAE integrated systems | 01/10/2019 - 30/11/2020 | 690/QĐ-DCT |
| 11 | DC01003009002 | Research, design, and fabrication of a multi-functional experimental drying model with intelligent control and monitoring systems | 01/03/2022 - 28/02/2023 | 2916/QD-DCT |
| 12 | DC01003020001 | Research, design, and fabrication of a soft robot hand to support people with disabilities | 01/09/2020 - 02/08/2021 | 3030/QĐ-DCT |
| 13 | - | Research and optimization of ultrasonic welding modes for electric vehicle battery terminals | 14/08/2023 - 14/08/2024 | 3274/QĐ-DCT |
| 14 | DC01003012002 | Research and design of a Delta robot for food sorting and packaging lines using image processing techniques and soft grippers | 01/03/2022 - 09/11/2023 | 3335/QĐ-DCT |
| 15 | DC01003030001 | Design optimization of a stair-climbing wheelchair | 01/09/2023 - 31/08/2024 | 2219/QĐ-DCT |
| 16 | DC01003030002 | Design optimization of a symmetrical differential lever displacement amplification mechanism | 15/08/2023 - 14/08/2024 | 2904/QĐ-DCT |
| 17 | DB01003002001 | Design and fabrication of a food waste treatment machine using probiotics. Capacity: 100kg/day | 23/03/2011 - 30/12/2011 | 1847/QĐ-DCT |
February 22, 2021
|
No. |
Title/ Project |
Projects at different levels (State, Ministerial, Sectoral, Provincial, and Institutional levels) |
Duration |
Role |
|||
|
State |
Ministry |
City/province |
Institution |
|
|
||
|
1 |
Research on the calculation and design of a centrifugal machine and a fluidized-bed dryer for refined salt for a continuous refined salt production line. |
State level project KC07 |
|
|
|
04.2007 – 04.2010 |
Do Huu Hoang (Project Member) |
|
2 |
Designing the Mechanical Products Based on CAD/CAE System Simulation |
|
|
Vietnam National University, Ho Chi Minh City |
|
2007 – 2010 |
Nguyen Huu Tho (Participant); led by Assoc. Prof. Dr. Nguyen Huu Loc |
|
3 |
Design and Analysis a 40-Ton Crane System with a 29.5m reaching a length |
|
|
Department of Science and Technology |
|
2008 |
Nguyen Huu Tho, Nguyen Vu Anh Duy (Participants); led by Assoc. Prof. Dr. Nguyen Hong Ngan |
|
4 |
Manufacturing Equipment for Placing and Finishing a Concrete Slope: Cylinder Finisher Machine |
|
|
Department of Science and Technology |
|
2008-2010 |
Nguyen Huu Tho, Nguyen Vu Anh Duy (Participants); led by Assoc. Prof. Dr. Nguyen Hong Ngan |
|
5 |
A Pilot Study on the Appropriate Technology for Compression Storage and Use of Biogas as Fuel |
International (JICA – Japan)
|
|
|
|
2010-2011 |
Nguyen Ngoc Dung (project leader) |
|
6 |
Design and Manufacturing of a Microbial Food Waste Treatment Machine with a Capacity of 100 kg/day |
|
Ministerial-level project |
|
|
2010-2011 |
Trinh Tien Tho, Dang Van Hai (participants) |
|
7 |
Research on the Application of Rice Husk Gasification Combustion Technology and Manufacturing of Household-Scale Gasified Rice Husk Stoves for Rural Areas in Can Tho City |
|
|
Independent provincial-level research
|
|
03/2010 – 02/2011 |
Dr. Do Huu Hoang (Project Leader) |
|
8 |
Research and Design of a 3-Cylinder Multi-Fuel Diesel Engine Using Biofuels (Diesel, biodiesel, biogas, etc.) for Agriculture, Services, and Rural Transportation |
|
|
Vietnam National University, Ho Chi Minh City – Type A |
|
2010 – 2012 |
Nguyen Ngoc Dung (Participant) |
|
9 |
Research on Optimizing the Blending Ratio of Diesel Fuel and Biodiesel Derived from Basa Fish Fat |
|
|
|
Institutional-level Project |
2010 – 2011 |
Nguyen Ngoc Dung (Project Leader) |
|
10 |
Development of Appropriate Technology for High-Performance Biogas-Based Diesel Engines |
International Project (JICA – Japan) |
|
|
|
2011 – 2012 |
Nguyen Ngoc Dung (Project Leader) |
|
11 |
Research and Design for Converting Motorcycles to Multi-Fuel Operation |
|
|
|
Institutional-level Project |
2011 – 2012 |
Nguyen Ngoc Dung (Project Leader) |
|
12 |
Research, Assessment, and Identification of Causes of Vehicle Fires in Ho Chi Minh City |
|
|
Department of Science and Technology |
|
2012 |
Nguyen Ngoc Dung (Co-Project Leader) |
|
13 |
Research on Improving Surface Roughness of N-BK7 Optical Glass Using Abrasive Slurry Polishing Process |
International Project (Taiwan) |
|
|
|
2010 – 2012 |
Pham Huu Loc (Participant) |
|
14 |
Research on Improving Surface Roughness of Zr-Based Bulk Metallic Glass Using Abrasive Slurry Polishing Process |
International Project (Taiwan) |
|
|
|
2009 – 2012 |
Pham Huu Loc (Participant) |
|
15 |
Research on Enhancing Surface Smoothness of Zr-Based Bulk Metallic Glass Using Abrasive Slurry Polishing Combined with Heat Treatment |
International Project (Taiwan) |
|
|
|
2009 – 2012 |
Pham Huu Loc (Participant) |
|
16 |
Research on Optimal Polishing Parameters Using Abrasive Slurry Polishing Combined with Gas-Assisted Technique |
International Project (Taiwan) |
|
|
|
2011 – 2012 |
Pham Huu Loc (Participant) |
|
17 |
Calculation and Design of the Ventilation System for Room A404 – Ho Chi Minh City University of Industry and Trade |
|
|
|
University-level Project |
2012 – 2013 |
Dang Van Hai (Participant) |
|
18 |
Research and Development of a Constant-Volume Combustion Chamber for Studying Engine Combustion Processes and New Fuels |
|
|
Vietnam National University, Ho Chi Minh City – Type C |
|
2013 – 2014 |
Nguyen Ngoc Dung (Project Leader) |
|
19 |
Integrated Production Planning and Decision Analysis System for SMEs |
State-level Project (Malaysia) |
|
|
|
2012 – 2015 |
Nguyen Huu Tho (Project Member); led by Assoc. Prof. Dr. Siti Zawiah Dawal |
|
20 |
Research and Design of a 500W Wind Power Generator |
|
|
|
University-level Project |
2014 |
Nguyen Tan Ken (Participant) |
|
21 |
Research and Design of an Automatic Shrimp Peeling Production Line |
|
|
|
University-level Project |
2015 |
Nguyen Tan Ken (Participant) |
|
22 |
Design and Position Control of a Piezoelectric Rotary Actuator |
|
Ministerial-level Project |
|
|
2014 – 2016 |
Le The Truyen (Participant) |
|
23 |
Stair-Climbing Assistive Device for the Elderly and People with Disabilities |
|
|
|
University-level Project |
2015 – 2016 |
Nguyen Minh Huy (Project Leader); Trinh Tien Tho (Participant) |
|
24 |
Research and Design of a Bus Seat with Low-Frequency Vibration Isolation Capability |
|
Ministerial-level Project |
|
|
2015 – 2017 |
Le The Truyen (Participant) |
|
25 |
Survey and Overall Design of a MICROGRID Project |
International Project (United States) |
|
|
|
2015 – 2017 |
Led by Nguyen Ngoc Dung |
|
26 |
Design and Manufacturing of a Fuel-Saving Device for Motorcycles |
|
|
|
Institutional-level Project |
2015 |
Nguyen Ngoc Dung (Project Leader) |
|
27 |
Research, Design, and Manufacturing of Lifting and Handling Equipment for Sugarcane Loading |
|
Ministerial-level Project |
|
|
2015 |
Pham Huu Loc (Project Secretary) |
|
28 |
Research, Design, and Manufacturing of a Solar-Powered Irrigation System Controlled via Mobile Phone |
|
|
|
University-level Project |
2016 – 2017 |
Pham Van Toan (Project Leader) |
|
29 |
Research, Design, and Manufacturing of a Heat Pump Drying System Model and Determination of Automatic Drying Modes for Vegetables and Fruits |
|
|
|
University-level Project |
2016 – 2017 |
Pham Van Toan, Hoang Trong Tran Huy, Dang Van Hai (Participants) |
|
30 |
Research and Design of Renewable Energy Systems from Distributed Sources |
International Project (United States) |
|
|
|
2017 – 2018 |
Nguyen Ngoc Dung (Project Leader) |
|
31 |
Research on Increasing Cooling Capacity of a CO₂ Air Conditioning System with a Microchannel Evaporator. |
|
|
|
University-level Project |
2017 – 2018 |
Vo Kim Hang (Project Leader) |
|
32 |
Design and Manufacturing of an Avocado Dryer Using Heat Pump Drying Technology and Optimization of Drying Parameters |
|
|
|
University-level Project |
2018 |
Nguyen Thi Ut Hien (Project Leader) |
|
33 |
Research and Development of a Gas–Liquid Cylindrical Cyclone (GLCC) Separator Model |
|
|
|
University-level Project |
2018 |
Nguyen Tan Ken (Participant) |
|
34 |
Research and Development of a Waste Removal System for Shrimp Farming Ponds |
|
|
|
|
2017 – 2019 |
Le The Truyen (Project Leader) |
|
35 |
Research, Design, and Manufacturing of a Magnetic Water Descaling Device |
|
|
|
University-level Project |
2018 – 2019 |
Nguyen Le Thai (Project Leader); Trinh Tien Tho (Participant) |
|
36 |
Research, Design, and Manufacturing of an Automatic Vietnamese Spring Roll Rice Paper Production Machine with a Capacity of 2,000 pieces/hour |
|
|
|
|
2019 – 2020 |
Le The Truyen (Project Leader) |
|
37 |
Study on Heat Distribution of the Heating Unit in an Automatic Vietnamese Spring Roll Rice Paper Production Machine |
|
|
|
University-level Project |
2019 |
Nguyen Tan Ken (Participant) |
|
38 |
Study on the Effects of Technological Parameters on the Bending Strength of pressed bamboo pulp board |
|
|
|
University-level Project |
2020 |
Nguyen Tan Ken (Participant) |
|
39 |
EFFECT OF BLIND SPOT DETECTION TECHNOLOGY ON LANE-CHANGE CRASHES |
ASEAN NCAP Collaborative Holistic Research (ANCHOR) II (Malaysia) |
|
|
|
2019-2022 |
Nguyen Huu Tho (participant) |
Tags:
- #scientific_research #research_project #scientific_project